Installation manual

9
PureFlow AirDog
AirDog
®
FP-100 & FP-150 Dodge 1998.5 - 2004
Section 4 AirDog
®
& Mounting Brackets
Installing the AirDog
®
& Mounting Brackets on the
Truck’s Frame!
Figure 2 Figure 3
4-1. Assemble the AirDog® mounting bracket to the frame bracket.
Figure 4 Figure 5
4-2. Use the spacer block to clear lines and wiring harnesses on the frame.
Adjust the assembly up or down on the frame bracket as necessary for clearance.
FUEL IN ENGINE
4-3. Install a 1/2” J2004 QC x 3/8” NPTF male quick
connect (08J2044-3/8NPTF) into the
“ENGINE” and “FUEL IN” ports in the
AirDog®.
Figure 6
WARNING: The NPT fitting threads must be lubricated with oil or anti-seize compound
before installation to prevent galling!
4-4. Attach the AirDog® to the frame bracket assembly.
Figure 7