Installation manual

3
OVERVIEW
Welcome to PureFlow
®
AirDog
®
Fuel Air Separation, Filtration and Delivery System for the Diesel Engine!
The AirDog
®
Fuel Air Separation system is a Premium replacement lift pump and
filtration system for the Dodge Cummins 5.9L 12 Valve diesel engine. A
complete installation kit is included.
The AirDog
®
delivers clean fuel to the engine free of virtually all air/vapor and at
a positive flow. Thus, allowing the engine “test cell” performance and efficiency,
while in “real world” use.
The AirDog
®
FP-100 is recommended for stock and slightly modified 5.9L 12
Valve Cummins Diesels.
The AirDog
®
FP-150 is recommended for highly modified 5.9L 12 Valve
Cummins Diesels.
PureFlow® products are manufactured with a personal touch,
unsurpassed attention to detail
and
the most stringent quality control!
TYPICAL INSTALLATION LAYOUT
Figure 1
The AirDog
®
draws fuel from the fuel tank at constant flow, removing water, particulates,
entrained air and vapor. A regulated pressurized flow is maintained to meet the engine’s
varying fuel demands. The separated air/vapor is returned by the AirDog
®
to the fuel tank.
NOTE: The pictures used in this manual are for example only and may not be exactly the same
as your truck.
Fuse Panel