Installation manual

13
PureFlow
®
Technologies, Inc
AirDog
®
FP-100 & FP-150 Dodge 2005 - 2009
Section 5-C Fuel Lines
Fuel Return Line from the AirDog
®
to the Tank
Installing the fuel 'Return to Tank' assembly in Filler Tube
Figure 34-A Figure 35-A
5C-1. Cut filler tube as illustrated, removing 1½ inches. Loose assemble clamps on each
end of filler tube.
Figure 34-B Figure 35-B
5C-2. Insert 'Return To Tank' assembly in filler tube rotate and position -8 flare fitting.
Properly tighten clamps.
Figure 36
5C-3. Measure and cut the length of fuel line necessary to connect the AirDog
®
to the
'Return to Tank' assembly in the filler tube.
Return Line to Tank
Fuel Tan
k
Hose Clam
p
Filler
Tube
Filler
Tube
Hose Clam
p
Fuel Tan
k