Installation manual

16
PureFlow
®
Technologies, Inc
AirDog
®
FP-100 & FP-150 Dodge 2005 - 2009
Section 5-D Fuel Lines
INSTALLING THE SUCTION TUBE TO BYPASS THE INTANK FUEL
PUMP, Cont’d
If you choose to remove the bed, properly support the truck bed to prevent
serious injury or death!
Figure 46 Figure 47
IMPORTANT: Select a location for the suction tube that has adequate clearance
below the bed. Also consider that under hard acceleration, fuel will migrate
toward the back of the fuel tank.
NOTE: The fuel tank used for the pictures is for an example only and may not be exactly the
same as your tank.
5D-1. Remove the collection basket.
Figure 48
Figure 49
5D-2. Drill a 1-1/8” hole at the selected location in the fuel tank for the suction tube. Hold
a container below the drill point to catch debris.
Figure 50 Figure 51