Installation manual

20
Power Supply Red +
Pow
er Supply
Black
-
Relay Trigger Lead
ECM Pump Lead Connectors,
Female
PureFlow
®
Technologies, Inc
AirDog
®
FP-100 & FP-150 Dodge 2005 - 2009
Section 6 Electrical Harness
The AirDog
®
wiring harness features all water proof Deutsch connectors,
relay, and fuse holder. When properly installed, the AirDog
®
is controlled
by the
engine’s ECM.
WIRING DIAGRAM (In Red)
Figure 70
The AirDog
®
is activated by the ECM through a relay controlled wiring harness connecting
directly to the original ECM Deutsch pump connector.
Figure 71
CAUTION: If the OPTIONAL Low Pressure Indicator Light is not used, be sure to insulate
the two (2) #10 Indicator Light connectors to prevent accidental contact.
Securing the Relay and Fuse Holder to the Vehicle
6-1. Secure the relay and fuse holder to the vehicle.
Figure 72 Figure 73
Pressure Sensor Lead
Motor Power Supply Lead
Low Fuel Pressure
Indicator Li
g
ht Leads