Installation manual

3
OVERVIEW
Welcome to PureFlow
®
Technology’s AirDog
®
Fuel Air Separation, Filtration and Delivery System for the Diesel Engine
The AirDog
®
Fuel Air Separation system is a Premium replacement lift pump
and filtration system for the Dodge Cummins diesel engine. A complete
installation kit is included.
The AirDog
®
delivers clean fuel to the engine free of virtually all air/vapor and
at a positive flow. Thus, allowing the engine “test cell” performance and
efficiency, while in “real world” use.
The AirDog
®
FP-100 flows 100 GPH and is recommended for stock and
slightly modified 5.9 L & 6.7L Cummins Diesels.
The AirDog
®
FP-150 is recommended for highly modified 5.9L & 6.7L
Cummins Diesels.
PureFlow products are manufactured with a personal touch,
unsurpassed attention to detail
and
the most stringent quality control!
TYPICAL INSTALLATION LAYOUT
Figure 1
The AirDog
®
draws fuel from the fuel tank at a constant flow, removing water, particulates,
and air/vapor. A regulated pressurized flow is maintained to meet the engine’s varying fuel
demands. The separated air/vapor is returned by the AirDog
®
to the fuel tank.
NOTE: The pictures used in this manual are for example only and may not be exactly the
same as your truck.