Installation manual

5
PureFlow
®
Technologies, Inc
AirDog
®
FP-100 & FP-150 Dodge 2005 - 2009
Section 2 Installation & Safety Guidelines
AirDog
®
MODEL FP-100 & 150
The installation of your AirDog
®
can be made relatively easy by following the steps
outlined in this manual, and:
1. Inventory the package components completely. Notify PUREFLOW
®
TECHNOLOGIES, INC. immediately of any parts missing or damaged.
2. Read the installation manual completely. Understand how the system
operates and installation recommendations before beginning installation.
3. The installation recommendations contained herein are suggested
installation guidelines only. Individual installations may vary.
4. If any installation procedure is uncertain, contact PUREFLOW
®
TECHNOLOGIES, INC for technical assistance.
SAFETY GUIDELINES!
NOTE: Proper location of the AirDog
®
on the vehicle is essential.
Consider hazards presented to the equipment by road debris
and the elements.
WARNING! Please be sure to chock the vehicle’s tires to prevent rolling.
WARNING! Please use proper supports when working beneath an elevated
vehicle.
WARNING! Most diesel pickups have two (2) 12volt batteries. Disconnect
the battery cables to both batteries before proceeding with the
AirDog
®
installation.
IMPORTANT! Use diesel fuel compatible thread sealer on all NPT tapered
pipe thread fuel fitting connections!
WARNING! Vehicle frame rails should not be drilled into or welded upon.
CAUTION! Wear safety glasses when operating power tools such as drills
and grinders or when using a punch or chisel.
CAUTION! Use common sense when routing fuel lines and electrical
harnesses. Keep them away from hot exhaust components
and/or moving parts. Properly secure lines to prevent chaffing.
Use Good Judgment and Common Sense When Installing the AirDog
®
!