Installation manual

7
PureFlow
®
Technologies, Inc
AirDog
®
FP-100 & FP-150 Dodge 2005 - 2009
Section 4 AirDog
®
& Mounting Brackets
Section 4: Installing the AirDog
®
& Mounting Brackets on
the Truck’s Frame!
Figure 2 Figure 3
4-1. Assemble the AirDog® mounting bracket to the frame bracket.
Figure 4 Figure 5
4-2. Use the aluminum spacer block to clear lines and wiring harnesses on the frame.
Adjust the assembly up or down on the frame bracket as necessary for clearance.
FUEL IN ENGINE
4-3. Install a 3/8” NPT x -8 JIC flare fitting
in the ‘FUEL IN’ and the out to ‘ENGINE’
ports in the AirDog®.
Figure 6
4-4. Attach the AirDog® to the frame bracket assembly.
Figure 7