Fast Wireless Charger
Specs • Output: Up to 15W (Fast Charge) Charging time may vary based on device ** NOTE: 20W USB-C Power Adapter is required (not included) to enable fast wireless charging. * Caution DO NOT place any credit cards or other types of magnetic material near the charging pad. Do not attempt to disassemble the wireless charging pad as it may short circuit or damage the product. Keep at least 8” (10cm) distance between implantable medical devices such as pacemakers, cochlear implants, etc.
ENGLISH 1. Plug the USB-C connector into the wall charger. (USB-C wall charger not included.) 2. Plug in the wall charger. 3. Place the PureGear Magnetic Wireless Charging Pad onto the back of your Qi-enabled device until it automatically aligns and the LED light comes on. Note: The LED light will turn off after 30 seconds. NOTES: • The white LED light will flash when interference is detected, or an object is in the way of the charger.
ENGLISH This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 8 inches between the radiator & your body. FCC Interference Statement This device complies with Part 15 of the FCC Rules.
IC Statement ENGLISH This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment.