DD-250 Owner’s Manual 2 x 5 DVI Distribution Amplifier PureLinkTM 535 East Crescent Avenue Ramsey, NJ 07446 USA Tel: +1.201.488.3232 Fax: +1.201.621.6118 E-mail: sales@purelinkav.com www.purelinkav.com For order support, please contact your local dealer. For technical support, please contact us at support@purelinkav.
PureLink by Dtrovision Table of Contents 1-1 Package Contents p.3 1-2 General Specification p.4 1-3 Environmental and Reliability Specifications p.5 1-4 Main Features p.6 1-5 Setup / Installation p.7 1-6 Mechanical Specification p.8 1-7 Technical Specification p.9 1-8 Warranty Information p.10 1-9 Troubleshooting p.
PureLink by Dtrovision 1-1 Package Contents - DD- - Owner’s Manual 3
PureLink by Dtrovision 1-2 General Specification The PureLink DD-250 2x5 Distribution Amplifier is designed to distribute up to 5 DVI outputs (PC, AVR) at full 1080p HD, to as many as 5 HD display monitors with no degradation of the original signal quality or distortion of the image. The DD-250’s compact, durable and low power-consumption design makes it an ideal solution for connection of the high definition video and audio content in digital display devices, such as an LCD, Plasma, LED, Projector, etc.
PureLink by Dtrovision 1-3 Operation and Reliability Specification 1. Operating Environment Temperature : Humidity : Altitude : 10℃~ 40℃ 10% ~ 80%, non-condensing maximum 3,000m 2. Transit Environment Temperature : Humidity : Altitude : -25℃~ 60℃ 5% ~ 95%, non-condensing maximum 15,000m 3. Storage Environment Temperature : Humidity : Altitude : -20℃~ 45℃ 5% ~ 95%, non-condensing maximum 3,000m 4.
PureLink by Dtrovision 1-4 Main Features 1. High Quality Picture - No Signal Loss and Digital Noise Free PureLink’s Distribution Amplifiers are built to deliver the highest quality picture, preserving the native resolutions of the video sources without any signal loss. At the same time, the digital noise that may affect the picture quality will also be eliminated.
PureLink by Dtrovision 1-5 Setup / Installation CABLE INSTALLATION 1. Turn off the whole system before connecting any cables 2. Connect your video source’s output DVI cable to DD-250’s input port using a standard DVI cable. 3. Connect the DD-250’s output to your display device(s) input port using a standard DVI cable. 4. Plug the 12V power adapter in to the DD-250 5. You may start turning on your system in the following order : DD-250 -> Display ->Video Source. 6.
PureLink by Dtrovision EXT EDID LOAD OUT1 to IN1 <- When Input# 1 is selected EXT EDID LOAD OUT1 to IN2 <- When Input# 2 is selected You will see the following error message if the EDID data program failed or there is no EDID data present. You may also want to check the cable connection or monitor’s power supply if an error occurs: EDID Loading! Load Error Internal EDID Programming: 1.
PureLink by Dtrovision 1-6 Mechanical Specification Dimension DD-250 : 13.7(W) x 6.4(D) x 1.7(H) Inch, Weight: 3.
PureLink by Dtrovision 1-7 Technical Specification Frequency bandwidth: 2.
PureLink by Dtrovision 1-8 Warranty Information PURELINK STANDARD LIMITED WARRANTY For Products purchased directly from PureLink or Dealer, PureLink warrants Products shall be free from defects in workmanship and materials, under normal use and service, for a period of five (5) years on parts and three (3) years on labor for PureMedia and Media Axis Products, (39) months on parts and labor on all PureView products, and three (3) years on parts and labor for all other Products from date of purchase.
PureLink by Dtrovision 1-9 Troubleshooting Problem Distribution Amplifier does not operate No picture(or signal) Or Poor picture Incorrectly sized picture /resolution or No picture Solution Make sure the 12V power is plugged in the back of the unit. Check to see if the power LED light is on. 1. In case your video source is HDCP enabled, make sure your video display (HDTV) is HDCP compliant. 2.