RF6T / RF6R Series Rack Mountable Fiber Optic/CAT5 DVI/HDMI Modular Extension Center Owner’s Manual Dtrovision LLC 9A Bergen Turnpike Little Ferry, NJ 07643 USA Tel: +1.201.488.3232 Fax: +1.201.621.6118 Email: support@dtrovision.com www.dtrovision.com For order support, please contact your local dealer. For technical support, please contact us at support@dtrovision.
RF6T/R Package Contents Please make sure all of the following items are included in the package; 1) RF6T/RF6R Frame 2) Transmitter/Receiver modules (if purchased separately) 3) DC 12V Power Supply Unit with a power cord 4) Rack ears 5) User Manual
General Specification • RF6T/RF6R is a revolutionary 19’’ 1-RU size rack mount assembly for DVI/HDMI fiber optic/CAT5 extension modules. Various transmitter and receiver modules are designed for slot-loading into the RF6T/RF6R main frame. • Able to mix DVI/HDMI and Fiber Optic/CAT5 extension, RF6T/RF6R features one power supply for up to six modules per frame, eliminating a lot of small adapter type power supplies, housed in a 1 RU rack housing.
Model Input Signal Output Signal Supporting Display Resolutions RF6T/RF6R DVI, HDMI, 3.5mm Analog Audio Optional RS-232, IR DVI, HDMI, 3.5mm Analog Audio Optional RS-232, IR VGA ~WUXGA(up to 1920 x 1200 @ 60Hz) , 480i ~ 1080p CAT5 Modules: 1920x1200 @ 60Hz or at 1080p: 50M(165ft) Max.
Operation and Reliability Specification 1. Operating Environment Temperature: 50F ~ 104F (10℃~ 40℃) Humidity: 10% ~ 80% Altitude: 3,000m Max. 2. Transit Environment Temperature: -13F ~ 140F (-25℃~ 60℃) Humidity: 5% ~ 95% Altitude: 15,000m Max. 3. Storage Environment Temperature: -4F ~ -49F (-20℃~ 45℃) Humidity: 5% ~ 95% Altitude: 3,000m Max. 4.
Main Features 1. Zero loss & Zero noise delivery of digital high definition video and audio signal using optical conversion technology, RF6T/R delivers HD signals over fiber optic/Cat5 cables without loss or digital interference maintaining the clarity and colors. Noise cancellation and error correction logic enhances DVI/HDMI video and audio signals over long distance. 2. Built-in signal repeater to support longer distance between the source and the RF6T/R and the display.
Installation and Connection Instructions 1. Turn off both the video source and the display before connecting any cables. 2. Connect DVI/HDMI cable between the source and RF6T/Stand-alone transmitter AND between the RF6R/Stand-alone receiver and the display. 3. Cable Connection: 1) Fiber Cable: Connect LC terminated fiber optic cables according to the picture below; 2) CAT5 Cable: RT6T/RF6R was designed to conform to TIA/EIA-568-B Standard.
4. Connect the power supply unit to both RF6T/Stand-alone transmitter AND the RF6R/Standalone receiver units. 5. Turn on Display 6. Turn on Video Source RF6T Specification Dimensions: 17.3x6.7x1.7(inches) 440x170x44(mm) Front Panel: LCD Display: 16*2 LCD ST 1 ~ 6 LED: Input Slot Check Power: Power on/off button ▲▼◀▶: Move button MENU: Menu button ENTER: Enter button Rear Panel: DVI/HDMI IN: DVI-D/HDMI Input Audio IN: 3.
- HT1000: Optical, HDMI, 3.5mm Stereo, up to 6 modules can fit in RF6T - DT1000RV: Optical, DVI, 3.5mm Stereo, RS-232, IR, up to 3 modules can fit in RF6T - DT50: CAT5, DVI, 3.5mm Stereo, up to 6 modules can fit in RF6T - HT50: CAT5, HDMI, 3.5mm Stereo, up to 6 modules can fit in RF6T - DT50R: CAT5, DVI, 3.5mm Stereo, RS-232, IR, up to 6 modules can fit in RF6T - HT50R: CAT5, HDMI, 3.5mm Stereo, RS-232, IR, up to 6 modules can fit in RF6T RF6R Specification Dimensions: 17.3x6.7x1.
Power: Power on/off button ▲▼◀▶: Move button MENU: Menu button ENTER: Enter button Rear Panel: DVI/HDMI Output: DVI-D/HDMI Output Audio OUT: 3.5mm Stereo Audio Output 1234: Fiber Optical Receptacles CAT-5 : RJ45 (CAT5/e/6) Receptacles DC +12V: 12V DC Power Supply Unit Input Available Input Modules - DR1000: Optical, DVI, 3.5mm Stereo, up to 6 modules can fit in RF6R - HR1000: Optical, HDMI, 3.5mm Stereo, up to 6 modules can fit in RF6R - DR1000RV: Optical, DVI, 3.
Part # Compatible Part # RF6T Hold DT1000, HT1000, DT1000RV, DT50, HT50, DT50R, HT50R RF6R Hold DR1000, HR1000, DR1000RV, DR50, HR50, DR50R, HR50R DT1000 Compatible with DR1000, DRS1000, OBC II RX, OLC RX HT1000 Compatible with HR1000, HRS1000, HDX II RX DT1000RV Compatible with DR1000RV, DWR1000RV, DWRS1000RV DT50 Compatible with DR50, DRS50, DCE RX HT50 Compatible with HR50, HRS50, HCE RX DT50R Compatible with DR50R, DRS50R, DCE RX HT50R Compatible with HR50R, HRS50R, HCE RX DR1000 Co
--> When Slot is connected and input signal is detected SLOT:123456 [ 1920 x 1080P/60 ] --> Display Selected Slot’s input signal information --> When Slot is not connected SLOT:123456 [ Slot N .C ] --> Slot N.
4. Sub Menu detail [ 1. Video Info ] --> Display selected Slot # [ SLOT1 Time Info ] 1920 x1080P/60 --> Display input signal information * User Left/Right (◀▶) button to select slot # * User Up/down (▲▼) button to display selected slot’s information * Press menu button to cancel and go back to the main menu [ 2. Slot Firmware Version ] --> Display selected Slot # [ SLOT2 Firmware ] Soft Ver. : 1.
* Press menu button to cancel and go back to the main menu * EDID List - 800x600 60Hz , 1024x768 60Hz , 1280x768 60Hz , 1280x1024 60Hz - 1360x768 60Hz , 1366x768 60Hz , 1400x1050 60Hz , 1600x900 60Hz - 1600x1200 60Hz , 1680x1050 60Hz , 1920x1200 60Hz , HD1080i 60Hz - HD1080p (2CH) , HD1080p(Multi) [ 5.
--> When Slot is not connected SLOT:123456 [ Slot N .C ] --> Slot N.C : No module is connected to Slot --> When Slot is connected but no input signal is detected SLOT:123456 [ No Signal ] --> No Signal: Module is connected but no input signal is detected * User Left/Right (◀▶) button to move a cursor to the left and right Selected Slot’s video timing will be displayed 3. Sub menu Press Menu button to go to sub-menu list →1. V i d e o I n f o --> 1.
Technical Specification Data Transfer Speed: Frequency Range: Supporting Display Resolutions: I/O Signal Standard: Max Distance: Up to 2.25 Gbps (DVI Single Link), 10 Gbps (HDMI) 25 ~ 165 Mhz 1080p / Up to WUXGA (1920X1200)@60Hz DVI 1.0, HDMI 1.
Warranty 2 (Two) Year Warranty Dtrovision warrants this fiber optical HDMI extension cable to be free from defects in workmanship and materials, under normal use and service, for a period of two (2) year from the date of purchase from Dtrovision or its authorized resellers.
FCC/CE Statement This device complies with part 15 of FCC Rules and EN 55022/55024/61000-3 for CE certification. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must not accept any interference received, including interference that may cause undesired operation.
