Owner`s manual

PureLink by Dtrovision
TABLE OF CONTENTS 92
T01 NTSC T05 1920x1080i @50 T09 1920x1080p @30
T02 PAL T06 1920x1080i @50 T10 1920x1080p @50
T03 1280x720p @50 T07 1920x1080p @24 T11 1920x1080p @60
T04 1280x720p @60 T08 1920x1080p @25
Audio Matrix Volume Configuration
Audio Matrix volume configuration commands are for the green block Audio Matrix Router
AV: Output Audio Volume Setting (1.0dB Step Attenuation)
The "AV" is an initiation command for Audio Matrix Router's Output Audio volume setting. The
characters and numbers that follow the "AV" command tell the system, set Audio volume on
desired Audio Matrix Router's Output. The last character “!” is found at the end of a command
code which tells the system to execute the command.
For example, the command code
*255AVO01V01, O03V02! 
can be interpreted as follows: (*) Starting the command code (255) Router ID is 255
(AV) set Audio volume on Audio Matrix Router's Output on (O01) Output 01 to (V01) -
1.0dB (O03) Output 03 to (V02) -2.0dB (!) take the command. For a complete list of
command characters and their functions, see examples below.
V00: 0 dB Attenuation
V01: -1.0dB Attenuation
V02: -2.0dB Attenuation
-
-
-
V98: -98.0dB Attenuation
V99: Mute
Example:
Command Codes Action
*255AVALLV00!  Set all Output volume to 0dB attenuation
*255AVO01V01,O03V02!  Set Output1(-1.0dB), and Output3(-2.0dB) attenuation
*255AVO01-09V99!  Set Output1 ~ 9 to mute
AF: Output Audio Volume Status Request