Owner`s manual

PureLink by Dtrovision
TABLE OF CONTENTS 93
The "AF" is an initiation command for Audio Matrix Router's Output Audio volume
information request. The characters and numbers that follow the "AF" command tell the
system, to request Audio volume information of selected Output. The last character “!” is
found at the end of a command code which tells the system to execute the command.
For example, the command code
*255AFO01! 
can be interpreted as follows: (*) Starting the command code (255) Router ID is 255
(AF) request Audio volume information on (O01) Output 01(!) take the command. For a
complete list of command characters and their functions, see examples below.
Examples:
Command Codes Action
*255AFO01!  Check Audio Matrix Router Output 1 Audio volume
information
*255AFALLIO!  Check Audio Matrix Router's all Output volume
information
Router ID Check
User can confirm the Router’s Current ID setting.
 Universal Router ID is 999
Example:
Command Codes Action
*999I000!  Check Router’s ID
Firmware Version Check
User can confirm Router’s current firmware version.
Example:
Command Codes Action
*999?version!  Check Router’s Firmware version
Baud Rate Setting
User can set baud rate for RS-232 command control.
Enter the Baud rate setting command below. Replace the “#”s with the Input and Output
number(s).