Owner`s manual

PureLink by Dtrovision

PM series Extenders provide Auto EDID management system to meet today's sophisticated

digital connectivity integration environment.

Auto EDID management system

EDID library

14 most widely used EDID data is pre-programmed internal EEPROM chipset which user

can take and save onto the PM series transmitter.

EDID library list

800 x 600 @ 60Hz 1024 x 768 @ 60Hz 1280 x 768 @ 60Hz

1280 x 1024 @ 60Hz 1360 x 768 @ 60Hz 1366 x 768 @ 60Hz

1400 x 1050 @ 60Hz 1600 x 900 @ 60Hz 1600 x 1200 @ 60Hz

1680 x 1050 @ 60Hz 1920 x 1200 @ 60Hz HD 1080i @ 60Hz

HD 1080p (2CH) HD 1080p (Multi)

Factory default EDID is set to 1920 x 1080p@60Hz

By optimizing factory default EDID and EDID library feature, in most cases, PM series

Extender will work out of the box without any additional configuration.

Emulation

The user can easily save an EDID data from any display devices directly onto the PM series

Transmitter. By saving display device's EDID information on the Transmitter, it will act as a

display to the Video source.

* Connect display device to PM series Transmitter's HDMI/DVI port and then press EDID

S/W button. It will copy and save display’s EDID information to Transmitter’s EEPRom.

Note) There may be display devices that are not allowing other device to

emulate its EDID data.

Note) Certain EDID data may not be compatible with some devices, in this case,

it is recommended to user scaling option receivers.

3.1 Cable Termination

• CAT5e (HDBaseT) cable

• RS-232/422 cable

• IR cable