Owner`s manual
PureLink by Dtrovision
3
Chapter 1. Introduction
1.1 Safety Precautions
When using and installing Dtrovision PureLink product, adhere to the following basic safety
precautions.
• Read and understand all instructions before using and installing this product.
• The safety and operating instructions should be retained for future reference.
• Always use the correct external power supply (indicated on the product label) when
operating this unit.
• Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners
or aerosol cleaners. Use a damp cloth for cleaning.
• Mishandling of this product may lead to a fire or explosion hazard.
• Do not place any heavy objects or equipment on top of the product.
• Keep away from wet, magnetic, and flammable surfaces or substances.
• Air vents should be kept clean and unobstructed at all times.
• Any external impact may cause damage to the operation of this unit.
• Be sure this product is properly grounded (earthed) in order to prevent the risk of
electrical shock.
• Turn off and unplug power before adding or removing Input/Output Boards.
• Input/Output Boards may be damaged when they are replaced with power turned on.
• Use surge protectors and/or AC line conditioners when powering this product.
• Only use a fuse(s) with the correct fuse rating in your enclosure.
• Make sure the product is on or attached to a stable surface.
If you experience any malfunctioning of product or have any question as to operation
of the product, please contact our customer service center.
Dtrovision LLC
Tel: 201.488.3232
Email: support@dtrovision.com