Owner`s manual

PureLink by Dtrovision
5
Chapter 2. Features and Specifications
2.1 Features
▶ Transmitters directly compatible with PM CAT5e (HDBaseT) Input Board
PM CAT5e (HDBaseT) Transmitters can send signal directly to PM series Matrix
Router's CAT5e (HDBaseT) Input Board, eliminating the need of matching Receiver.
▶ Receivers directly compatible with PM CAT5e (HDBaseT) Output Board
PM CAT5e (HDBaseT) Receivers can receive signal directly from PM series Matrix
Router's CAT5e (HDBaseT) Output Board, eliminating the need of matching
Transmitter.
▶ HDMI v1.4, 3D Support
Adopting latest HDMI version 1.4 enables to support 3D, 48-Bit Deep Color, 4K x 2K
resolution and 7.1 Channel Dolby TruHD & DTS MasterHD
▶ Auto-EDID (EDID Library, Emulation)
PureLink's EDID library and emulation features failsafe EDID capture & storage to
provide constant and continuous EDID for source devices.
▶ HDCP Compliant
▶ Various Transmitter and Receiver Choices
There are three different type of transmitters and three different type of receivers to
make today's sophisticated digital AV environment simple and felxible.
▶ RF6 1RU Rack Mountable Version Available
PM-CT101, PM-CT102, PM-CR101, and PM-CR102 are also available in PureLink's
popular RF6 Rack Mountable Extension Center Modules.
▶ Analog Support (VGA and Component)
On PM-CT102 and PM-CT103 series, there are two video inputs; DVI/HDMI and VGA,
which are selectable via front panel button or serial command when it is connected PM
series Matrix Router. VGA port is designed to take component (YPbPr) signal with
appropriate adapters or cables.
▶ USB Firmware Update