Specifications

www.purelink.de 10

2) Usethe“Right(→)“inputpushbuttontogetintotheselectionofthesavedmappingconfiguration,
anduse“UP(↑)&DOWN(↓)”(1~8)tochoosewhichmappingyouwant






3) After you select the desired mapping configuration number, the number will be twinkled. Then,
presstheSETbutton,thedevicewillshowtheselectedmapping.
4) pressLEFT(
←
)buttontogobacktopre‐layer

3. DefaultEDIDMode
1) SelectDefaultEDIDModeandpressRIGHT(→)buttontoenterthismode
2) PressUP(↑)andDOWN(↓)buttontoselectthedefaultEDIDmode(1~8)
3) PressLEFT(←)buttontogobacktopre‐layer
4) PressUP(↑)andDOWN(↓)buttontoselectwhichinputwillbeapplied
5) PressSETbuttontoconfirm,andVFDwillshowOKorFAILaftersetting
6) OrpressLEFT(←)buttontogobacktopre‐layer
4.EDIDLearningMode(OUTOUTEDID)
1) SelectEDIDLearningModeandpressRIGHT(→)buttontoenterthismode
2) PressUP(↑)andDOWN(↓)buttontoselectwhichinputwilllearntheEDIDfromEDIDport
3) PressSETbuttontoconfirm;orpressLEFT(←)buttontogobacktopre‐layer
4) Ifconfirmed,VFDwillshowSUCCEEDorFAILafterlearning



