User`s guide

www.purelink.de
12
Method C: Software Control through RS-232 port
1. System Requirement
1) OS Information: MS WinXP/7
2) Baud rates: 9600
3) Software size: 3 MB
4) Minimum RAM requirement: 256 MB
1
FW/SW Version Button
7
Firmware Update Button
2
COM Port Selection
8
Network Button
3
Connection Status
9
Mapping Button
4
Connect/Disconnect Button
10
Default Reset Button
5
Power On/Off Button
11
In/Out Switch Button
6
EDID Button
12
Mute Output Button
2. Step by step for connecting matrix and controller
Step1: Use RS-232 cable to connect the RS-232 port on matrix and controller
Step2: Open the software and then choose the correct com port
Step3: Click connection button “ ”
Step4: Make sure the connection status is on connected status “ ”
11
12
1
2
3
4
5
6
7
8
9
10