User`s guide

www.purelink.de
16
9. Firmware Update Button
1) Click “Load File” to select the firmware file which you want to update
2) Click “Break” button
3) Quickly remove and reconnect the power input connector
4) Click “Start” button to begin the firmware update
10. Network Button
1) Click “Read From Device” to read the device IP address
2) Select “Ethernet” and then will be a pop-up windows
3) Key in the device IP address to the pop-up windows
4) Close the pop-up windows
5) Click the connected button to connect
11. Mapping Button
1) Save Mapping:
a) Select Mapping(1-8)
b) Click “Save” button to save current mapping