User`s guide

www.purelink.de
8
Section 2: Operation approach
Mode Selection
Pressing UP
(
↑
)
or DOWN
(
↓
)
button to select among 4 different modes – Save Mapping Mode, Preset
Mapping Mode, Default EDID Mode, EDID Learning Mode, and Status Mode
1. Save Mapping Mode
1) Pushing “Left (←)”button, to enter the Save Mapping Mode.
2) Use the “Right (→)“ input push button to get into the selection of the mapping configuration, and use
“UP (↑) & DOWN (↓)” (1~8) to choose which set you want to save current input/output mapping
3) After you select the desired mapping configuration number, the number will be twinkled. Then, press
the SET button, the setting will be saved successfully.
4) press LEFT(
←
) button to go back to pre-layer
2. Preset Mapping Mode
1) Pushing “Left (←)”button, and use DOWN (↓) button to enter the Preset Mapping Mode.