User Manual PT-PSW-92 User Manual 4K Scaler Switcher Multiformat Scaling, 4K (60Hz 4:2:0), HDMI & HDBaseT Out Model PT-PSW-92 Designed in Germany © 2017 PureLink GmbH All rights reserved. VersionV1.
User Manual PT-PSW-92 Preface Read this user manual carefully before using the product. Pictures shown in this manual are for reference only. Different model layouts and specifications are subject to the physical product. This manual is for operation instructions only, not for any maintenance usage. In the constant effort to improve our product, we reserve the right to make changes in functions or parameters without prior notice or obligation. Trademarks Product model and logo are trademarks.
User Manual PT-PSW-92 REACH | 1907/2006/EU ROHS | 2011/65/EU PureLink hereby declares that this product PureTools PT-PSW-92 complies with Directives 1907/2006/EU und 2011/65/EU. EMC / LVD (Electro Magnetic Compatibility / Low Voltage Directive) PureLink GmbH hereby declares that this product PureTools PT-PSW-92 complies with Directives 2014/30/EU and 2014/35/EU. The full text of the EU Declaration of Conformity is available at the following Internet address: http://www.purelink.de/ce/4251364706855 _CE.
User Manual PT-PSW-92 SAFETY PRECAUTIONS To insure the best from the product, please read all instructions carefully before using the device. Save this manual for further reference. Unpack the equipment carefully and save the original box and packing material for possible future shipment. Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. Do not dismantle the housing or modify the module. It may result in electrical shock or burn.
User Manual PT-PSW-92 Contents 1. Introduction .................................................................................................................................. 1 1.1 Introduction to PT-PSW-92 ............................................................................................ 1 1.2 Feature ................................................................................................................................ 1 1.3 Package List ..............................................
User Manual PT-PSW-92 7.1 Control Menu ...................................................................................................................21 7.2 Volume Menu ..................................................................................................................22 7.3 Configuration Menu .......................................................................................................23 7.4 Password Menu ..........................................................................
User Manual PT-PSW-92 1. Introduction 1.1 Introduction to PT-PSW-92 The PT-PSW-92 is a 9 inputs multi format A/V presentation auto 4k Scaler Switcher that scales video signals to HDMI and HDBaseT outputs simultaneously. The HDBaseT output supports PoH and can connect to a compatible HDBaseT Receiver up to a maximum of 100 meters / 328 feet.
User Manual PT-PSW-92 Controllable via buttons, IR Remote, RS232 & GUI. Powerful OSD function. Bi-directional IR & RS232 pass-through. Supports online software upgrading. 1.
User Manual PT-PSW-92 2. Panel Description 2.1 Front Panel 1 2 3 4 5 6 7 8 9 11 10 12 13 14 ① Power Indicator: Off when there is no power to the device. Green when the device is in standby mode. Red when the device is powered on.
User Manual PT-PSW-92 2.2 Rear Panel a b c d 2 1 e f 5 3 6 7 4 C D A B INPUTS: 1-HDBT/PoH& RS232: ① HDBaseT input port: support PoH, connect with an HDBaseT Transmitter to receive AV signal or IR/RS232 control signal. The RS232 port and that one on HDBaseT Transmitter can transmit RS232 commands each other by pass-through function. ② 2-DP: DP input with external audio input. ③ 3-HDMI: HDMI input port with external audio input, support 4k@60Hz 4:4:4, HDCP 2.2.
User Manual PT-PSW-92 OUTPUTS: A. HDMI: HDMI video output port. B. HDBT/PoH: Support PoH. Connect with an HDBaseT Receiver to transmit AV signal or IR/RS232 control signal. C. AUDIO: Audio output port, the audio comes from the input audio corresponding to the selected video source and is mixed with MIC audio. D. RS232: The RS232 port and that one on HDBaseT Receiver can transmit RS232 commands each other by pass-through function. CONTROL: a.
User Manual PT-PSW-92 3. System Connection 3.1 Usage Precaution Verify all components and accessories included before installation. System should be installed in a clean environment with proper temperature and humidity (see page29 for limits). All of the power switches, plugs, sockets and power cords should be insulated and safe. All devices should be connected before power on. 3.
User Manual PT-PSW-92 3.3 Microphone Connection PT-PSW-92 provides with one 3-level microphone input port, to accommodate different microphone input modes, including 48V phantom power mode, MIC mode & LINE mode. 48V phantom power Mode 48V phantom power input has a good frequency characteristic, high input impedance and high sensitivity. When switching to “48V”, the MIC input will provide a 48V phantom power. This is only used for condenser microphone.
User Manual PT-PSW-92 ② Balanced connection: “+” connects to positive, “-” connects to negative and “ connects to ground.
User Manual PT-PSW-92 LINE Mode LINE input has a low frequency characteristics, and wide frequency response. When switch to “LINE”, the microphone input is used for connecting with line audio or wireless microphone output. There are two different connection methods: ① Unbalanced connection: “+” and “ ” connect to ground, and “-” connects to signal. “-” and “ ” connect to ground, and “+” connects to signal.
User Manual PT-PSW-92 4. Button Control Front panel buttons can be used for switching operations and volume adjusting. 4.1 Manual Switching Press 1-HDBT/PoH, 2-DP, 3-HDMI, 4-HDMI, 5-HDMI, 6-HDMI, 7-HDMI, 8-VGA, or 9-VGA on front panel to select the corresponding input source. 4.2 Auto Switching Press AUTO to enter in auto-switching mode. The auto-switching mode abides by the following principles: New input Once detecting a new input signal, the switcher would switch to this new signal automatically.
User Manual PT-PSW-92 Note: When the DP signal is switched as input, the DP source device may not read the EDID data from display device, at this point re-plug the DP source device to solve this phenomenon. Auto-switching function works only when inputting new signal, removing a signal or power rebooting. 4.
User Manual PT-PSW-92 5. IR Control 5.1 IR Remote Control Connect IR Receiver to the IR EYE port, PT-PSW-92 can be controlled by using the IR Remote as below. ① 1 1 2 3 4 5 6 7 8 9 0 AUTO OK 2 MUTE Scaler Switcher ② Input channel selection buttons (1~9): Select video source via pressing corresponding button (audio switched following the corresponding 2-DP/3-HDMI/8-VGA/9-VGA). Auto: Enter/Exit auto-switching mode.
User Manual PT-PSW-92 While installing the battery, put electrodes in the right position to avoid short circuit. The battery shall not be exposed to excessive heat such as sunshine, fire or the like. Do not ingest battery. Chemical Burn Hazard. Please remove the battery when not in use. Do not mixed use the old and new battery, or different types. Keep new and used batteries away from children.
User Manual PT-PSW-92 5.2.2 To Control Local Source/PT-PSW-92 Connect an IR emitter to IR ALL OUT port on the PT-PSW-92, and then connect IR Receiver to the IR IN ports on the HDBaseT Transmitter and Receiver, the source devices or PT-PSW-92 can be control by their IR Remote.
User Manual PT-PSW-92 6. RS232 Control 6.1 RS232 Connection Connect the control PC to the RS232 port as shown as below: PC CONTROL INPUTS Tx FIRMWARE 1-HDBT/PoH IR EYE IR ALL IN IR ALL OUT RS232 Tx Rx Rx RS232 2-DP L TCP/IP 8-VGA 3-HDMI 4-HDMI 9-VGA 5-HDMI 6-HDMI L R LINE R MIC MIC 48V 7-HDMI LINE AUDIO HDMI OUTPUTS Tx AUDIO AMP Rx RS232 HDBT/PoH 40W MAX COM 70V 100V The baud rate support 2400, 4800, 9600(default), 19200, 38400, 57600 or 115200. 6.
User Manual PT-PSW-92 The interface of the control software is showed as below: Parameter Configuration area Monitoring area, indicates if the command sent works. Command Sending area Please set the parameters of COM number, bound rate, data bit, stop bit and the parity bit correctly, and then you are able to send command in Command Sending Area.
User Manual PT-PSW-92 6.3 RS232 Command Communication protocol: RS232 Communication Protocol Baud rate: 9600 Data bit: 8 Stop bit: 1 Command Function Parity bit: none Feedback Update Software update. update Factory Reset to factory default. Factory reset Open OSD menu. Key menu UP button. Key up DOWN button. Key down Left LEFT button. Key left Right RIGHT button. Key right Exit EXIT button (exit OSD). Key exit Ok OK for OSD selection. Key ok Switch to 1-HDBT input.
User Manual PT-PSW-92 Command Function 108060 Set output resolution to 1080p@60Hz. 108060 1280720 Set output resolution to 1280x720. 1280720 1024768 Set output resolution to 1024x768. 1024768 1360768 Set output resolution to 1360x768. 1360768 Restore the default EDID. RestoreEDID Read the EDID from output. xxxxx… DP audio1 Select embedded audio input for 2-DP video signal. DP audio embedded DP audio2 Select external audio input for 2-DP video signal.
User Manual PT-PSW-92 Command Output? Function Inquire the output resolution. Feedback 4k2k60/4k2k30/128072 0/1024768/1360768 HDMI external Audio? Inquire the input audio type. HDMI embedded DP external DP embedded Input? Inquire the input source. Hdbt/Dp/Hmdi3/Hmdi4/ Hmdi5/Hmdi6/Hmdi7/ Vga8/Vga9 amp volume: xx Volume? source volume: xx Inquire audio volume. mic volume: xx Mute/Unmute Svol:xx Set the volume of source audio. source volume: xx Avol:xx Set the volume of AMP audio.
User Manual PT-PSW-92 7. GUI Control In addition to control PT-PSW-92 via front panel button, IR Remote and RS232 communication software. PT-PSW-92 can be controlled via GUI. It allows users to interact with PT-PSW-92 through graphical icons and visual indicators. Type 192.168.0.
User Manual PT-PSW-92 7.1 Control Menu Type user name: user and password: user (default setting) on the log-in interface, and then click Login to enter Control menu shown as below: Source: Click the corresponding button (1-HDBT, 2-DP, 3-HDMI, 4-HDMI, 5-HDMI, 6-HDMI, 7-HDMI, 8-VGA or 9-VGA) to select video input source, or click AUTO to enter auto-switching mode. Audio: Click 2-DP or 3-HDMI to select external audio for DP or HDMI video signal.
User Manual PT-PSW-92 7.2 Volume Menu Click Volume to enter volume menu shown as below: The volume of Source, MIC, and Line audio can be adjusted.
User Manual PT-PSW-92 7.3 Configuration Menu ① Click on control menu to enter setting menu shown as below: Output Resolution: Select the output resolution that you need and then click Confirm to save setting. Update: Insert the USB flash disk with EDID file/software updating file to FIRMWARE port, and then click EDID/Firmware to start update procedure.
User Manual PT-PSW-92 ② Click Network to enter network setting menu shown as below: Dynamic or static IP mode can be selected. Under static IP mode, IP address and subnet mask, gateway can be set and make sure the IP addresses are different to avoid IP conflict.
User Manual PT-PSW-92 ③ Click Source Label to enter source label setting menu shown as below: The name of source input selection button can be modified as you need.
User Manual PT-PSW-92 7.4 Password Menu Click Password on the top of interface to enter password menu shown as below: Admin/user password can be modified as you need.
User Manual PT-PSW-92 7.5 GUI Update GUI for PT-PSW-92 supports online update in http://192.168.0.178:100. Type the username and password (the same as the GUI log-in settings, modified password will be available only after rebooting) to log in the configuration interface. After that, click Administration at the source menu to get to Upload Program as shown below: Select the desired update file and press Apply, it will start upgrading then.
User Manual PT-PSW-92 8. OSD Control PT-PSW-92 provides a powerful OSD operation menu, contains 3 parts: optional settings, image settings, and system setting etc. There are two ways to enter OSD menu: ① Press the MENU button on IR Remote. ② Send the command Menu on RS232 Control Software. Operation: Press direction buttons on IR Remote to switch between menu options and menu pages. Press OK on the IR Remote to confirm the selection.
User Manual PT-PSW-92 9. Specification Video Video Input (1) HDBaseT;(1) Display Port; (5) HDMI; (2) VGA Video Input Connector (1) RJ45; (1) Female Display Port; (5) Type A HDMI; (2) 15-pin Female VGA Video Output (1) HDMI; (1) HDBaseT Video Output Connector (1) Type A HDMI; (1) RJ45 Output Resolution 1280x720 (default), 1920x1080, 1024x768, 3840x2160@30Hz, 3840x2160@60Hz Standards Input video support HDMI 2.0 & HDCP2.2; Output video support HDMI 2.0 & HDCP1.4.
User Manual PT-PSW-92 General Relative Humidity 10% ~ 90% External Power Supply 100V~240V AC Power Consumption 45W (Max) Dimension (W*H*D) 436.4mm x 44mm x 276.5mm Net Weight 3.
User Manual PT-PSW-92 44 mm 10.
User Manual PT-PSW-92 11. Troubleshooting & Maintenance Problems Output image with white noise. No output image when switching POWER indicator doesn’t work or no respond to any operation Potential Causes Bad quality of the Try another high quality connecting cable cable. Fail or loose connection Make sure the connection is good No signal at the input / output end Check with oscilloscope or multimeter if there is any signal at the input/ output end.
User Manual PT-PSW-92 12. After-Sales Service If there appear some problems when running the product, please check and deal with the problems referring to this user manual. Any transport costs are borne by the users during the warranty. 1) Product Limited Warranty: The product will be free from defects in materials and workmanship for two years (The purchase invoice shall prevail).
User Manual PT-PSW-92 Asking for Assistance Technical Support: Phone: +49 5971 800299 - 0 Fax: +49 5971 800299 – 99 Technical Support Hours: 8:30 AM to 5:00 PM Monday thru Thursday 8:30 AM to 4:00 PM Friday Write to: PureLink GmbH Von-Liebig-Straße 10 D - 48432 Rheine www.purelink.de info@purelink.