Installation Sheet

SIGNATURE AND DESIGNER “ELITE” COMMAND PAD
06
1 STANDBY Mode LED Indicator Indicates the system is ready
to operate.
2 OFF Button Turns the jets OFF and returns the system to STANDBY.
3 LIGHT Button Used to control the optional mood light.
•Pressthe“Light”buttontoturnonthemoodlight
•Thelightdisplays7vividcolorsand2sequencingsettings.
•Tochangethelightcolor,pressthe“Light”buttontoturnitoff
and after one second press it again to turn it on.
•The color sequence is as follows: Bright White, Aqua Blue,
Soothing Blue, Ocean Blue, Majestic Gold, Shamrock Green, Fiery
Red, Chameleon Mode, Party Mode
•Intheeventthatthelightisleftturnedon,itwillautomatically
turn off after 2 hours continuous operation.
4 Display Displays the time remaining for system operation (the
timer counts down from 20 minutes and is reset when leaving the
STANDBY Mode).
5 ALL JETS Button Simultaneously controls all jet pairs at either
High or Low speed.
6 FOOT, MID, BACK Buttons Use to individually control the water
flow of the jets. Each jet pair can be set at either HI or LO speed
or turned OFF. When any of these buttons are pressed for less
than one second, the system will automatically increase or
decrease the water flow of the selected jet pair. The MID jet
button is not activated for 4-jet systems.
7 JetFlowLEDIndicatorsDisplaysthewaterflowoftheFOOT,MID,
and BACK jets.
8 PULSE Button Pulsates the water flow and simultaneously allows
individual jet pair control via the Foot, Mid, Back buttons. This
function allows all jets, any two jet pairs or any single jet pair to
pulse, while the non-pulsing jet pairs can be set at HI or LO speed
or turned OFF.
9 Pre-Programmed Massage Modes All three-zone models have
three pre-programmed massage modes: LINEAR, RANDOM and
AEROBIC.
LINEAR Massage Button: Activates a massage that begins with
the back and moves down the body to the feet. This button is
not activated for 4-jet systems.
RANDOM Massage Button: Creates water pulses in patterns of
limitless variation.
AEROBIC Massage Button: Activates a slowly changing massage
where all jets simultaneously alternate between pulses and
constant flow.
10 Personal Memory Modes The Personal Memory modes allow you
to store and recall the settings of the command pad via a single
button (the state of the mood light is not included). All 3-Zone
models can store and recall two personalized memory settings via
the Memory 1 and Memory 2 buttons.
MEMORY 1 Button To store your MEMORY 1 setting, press and hold
the MEMORY 1 button until the MEMORY 1 LED Indicator turns ON to
acknowledge the setting has been stored. To recall MEMORY 1 setting,
press the MEMORY 1 button for less than 1 second.
MEMORY 2 Button To store your MEMORY 2 setting, press and hold
the MEMORY 2 button until the MEMORY 2 LED Indicator turns ON to
acknowledge the setting has been stored. To recall the MEMORY 2
setting, press the MEMORY 2 button for less than 1 second. This button
is not activated for 4-jet systems.