Use and Care Manual

Introduction Installation Maintenance Troubleshoot WarrantySafety
Before Installation
Operation Parameters
INDOOR USE ONLY we recommend that the Purlette system installed under the kitchen sink. However, you may install
the Purlette system in any suitable indoor location away from direct exposure to the environment, with adequate
space for the Purlette system to stand upright.
DO NOT USE with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or
after the system.
APPLICABLE FEED WATER: municipal tap water
MAXIMUM INPUT WATER FLOW: 2.5 gpm
OPERATING WATER PRESSURE: 15–100 psi
OPERATING FEED WATER TEMPERATURE RANGE: 40–100º F
OPERATING GFCI VOLTAGE: 100–125 V
Recommended Tools
• Variable speed drill
• 1/4” drill bit (for drainpipe)
• Protective eye gear
• Adjustable wrench
• Phillips-head screwdriver
• Tube cutter (for adjusting PE tube length if desired)
Installation must be performed in compliance with local plumbing codes
Failure to comply with above installation and operation parameters can result in void of warranty