Use and Care Manual
Introduction Installation Maintenance Troubleshoot WarrantySafety
1
1/2
in.
How to properly install a partition
We recommend the power-supply receptacle for the Purlette system be
installed in a cabinet or on a wall adjacent to the undercounter space in which
the purier is to be installed.
There shall be an opening through the partition between the compartments
specied in that is large enough for the power plug to pass through. The
longest dimension of the opening shall not be more than 1 ½” (38 mm).
The edges of the opening shall, if the partition is wood, be smooth and
rounded, or, if the partition is metal, be covered with an edge protector
provided for this purpose by the manufacturer. Care shall be exercised, when
the purier is installed or removed, to reduce the likelihood of damage to the
power supply cord.
Installation