Use and Care Manual

Introduction Installation Maintenance Troubleshoot WarrantySafety
Before Installation
Operation Parameters
INDOOR USE ONLY we recommend that the Purlette system installed under the kitchen sink. However, you may install
the Purlette system in any suitable indoor location away from direct exposure to the environment, with adequate
space for the Purlette system to stand upright.
DO NOT USE with micro-biologically unsafe water or water from unknown sources or quality.
APPLICABLE FEED WATER: municipal tap water
OPERATING WATER PRESSURE: 14–100 psi
OPERATING FEED WATER TEMPERATURE RANGE: 40–100º F
OPERATING GFCI VOLTAGE: 100–125 V
Recommended Tools
• Variable speed drill
• 1/4” drill bit (for drain pipe)
• Protective eye gear
• Adjustable wrench
• Phillips-head screwdriver
• Tube cutter (for adjusting PE tube length if desired)
Installation must be performed in compliance with local plumbing codes
Failure to comply with above installation and operation parameters can result in void of warranty