Use and Care Manual

Introduction Installation Maintenance Troubleshoot WarrantySafety
Step 1: Install the three-way feed water ball valve (cont.)
Step 2: Attach water line to three-way feed water ball valve
Now it’s time to connect the tap water input line to the three-way feed
water ball valve.
Locate the tap water input line (blue PE tube) and connect one end to
the three-way feed water ball valve by pressing the one end of the tube
into the quick-connect tting. Be sure to push it in all the way until you
feel it stop otherwise leaks may occur. Then slide the locking clip into
place to secure the tube. Tug on the water line gently to ensure that it is
secure.
Do not connect the other end to the Purlette system at this time
Close
Open
Locking Clip
Optional
Installation
Point
Recommended
Installation
Point
Installation