Reverse Osmosis Water Filtration System Owner’s Manual Model # PL400G Scan QR code for installation video or visit www.purlette.
Congratulations! You are now the owner of a Purlette System! Purlette is an under-thesink water filtration system that makes tracking your water quality and keeping it clean and drinkable simpler than ever before. Using the accompanying mobile app you can monitor the potability of your water, know at all times exactly how much life your filter has left in it, and even order replacement filters directly through the app.
Introduction Installation Maintenance Safety Troubleshoot Warranty System Features Operation Touchpanel Before Installation What’s in the Box Three-Way Valve Drinking Faucet Drain Saddle Connect Water Line System Connection Diagram How to Install a Partition Flushing the Filters Replacing and Resetting the Filter Warnings and Precautions Self Troubleshooting Guide Three Year Limited Warranty
General Filter Replacement Intervals *Filter life may vary depending upon water usage and source water quality Auto-Cleaning High Precision PP Filter Reverse Osmosis Filter Carbon Block Filter Safety The Purlette system will regularly enter auto-cleaning mode. This is based on usage and will take place at random. The Purlette system will make an audible sound when it is in autocleaning mode.
RO HYBRID Filter Indicator Light RESET Touch-Button Network Indicator Light NETWORK NETWORK Touch-Button Power-on All indicator lights blink for 5 seconds when the Purlette system is plugged in, signaling that the system is starting. Operation Mode Filter indicator lights will stay lit (non-blinking) while filters are functioning properly. When the service life of a filter expires, the filter indicator light for the expiring filter will begin blinking.
Operation Parameters Warranty • Variable speed drill • 1/4” drill bit (for drain pipe) • Protective eye gear • Adjustable wrench • Phillips-head screwdriver • Tube cutter (for adjusting PE tube length if desired) Troubleshoot Recommended Tools Safety Failure to comply with above installation and operation parameters can result in void of warranty Maintenance Installation must be performed in compliance with local plumbing codes Installation INDOOR USE ONLY we recommend that the Purlette system ins
Introduction What’s in the Box Installation Dust Lid RO Filter Hybrid Filter Drinking Water Faucet and Parts Thread Seal Tape Maintenance Purifier Safety Troubleshoot Drain Saddle 1/4” Color Coded PE Tubes Locking Clips Quick Connectors Warranty Three-Way Feed Water Ball Valve
Step 1: Install the three-way feed water ball valve If your pipe connection is 1/2”, the three-way feed water ball valve is 3/8”, but comes with a 1/2” converter for your convenience. Warranty Add 1/2” Converter if Necessary Now install the three-way feed water ball valve. The three way feed water ball valve has a top and a bottom that are threaded nut connectors with a side quick-connect fitting.
Introduction Installation Step 1: Install the three-way feed water ball valve (cont.) Maintenance Optional Installation Point Installation Recommended Installation Point Step 2: Attach water line to three-way feed water ball valve Now it’s time to connect the tap water input line to the three-way feed water ball valve.
Introduction Installation Step 3: Install the drinking water faucet When installing an additional faucet, many times there are already pre-drilled holes available. Many sinks have a soap dispenser or spray hose hole that can be used for this purpose. If there is no pre-drilled hole, please consider hiring a professional, since some kitchen countertop materials may require specialized tools.
Step 4: Install the drain saddle Mount Drain Saddle at Either Location. Do not connect the other end to the Purlette system at this time Maintenance B A Next, align and install the 1/4” drain saddle’s quick connect fitting with the drilled hole. Attach the drain saddle to the drain pipe and tighten the two screws.
Introduction Installation Step 5: Connect water lines to Purlette system Outlet Inlet Drain Outlet Installation Drain Inlet Remove Safety Troubleshoot Warranty Connect each PE tube (now with quick-connector) to corresponding port. Read the label carefully before inserting. If a mistake is made, simply remove the locking clip and gently push the quick connector release lock in, near where the tube is attached, with one finger to release the lock and pull the PE tube out. Do not use force.
Step 6: Turn on the cold water supply and check for leaks Connection Diagram Now it’s time to check the system to make sure that there are no leaks! Troubleshoot Warranty Close Safety Open Maintenance Turn on the cold water supply and open the three-way feed water ball valve. Check each connection point for any leaks. If a leak is spotted, immediately turn off the cold water supply stop valve and ensure all fittings are properly installed and tightened.
Introduction Installation How to properly install a partition Installation We recommend the power-supply receptacle for the Purlette system be installed in a cabinet or on a wall adjacent to the undercounter space in which the purifier is to be installed. Maintenance 11/2 in. Troubleshoot Warranty The edges of the opening shall, if the partition is wood, be smooth and rounded, or, if the partition is metal, be covered with an edge protector provided for this purpose by the manufacturer.
Step 7: Plug in the Purlette system Now it is time to plug in the Purlette system. Introduction Installation Insert the power plug into the 110 V GFCI outlet socket. Maintenance The Purlette system will enter auto-cleaning mode for 80 seconds. No water will come out from the drinking faucet during this time. Installation 80 sec The indicator lights will blink for 5 seconds signaling that the system is starting.
Introduction Maintenance Replacing filter when indicator light is blinking 1. 2. 3. 4. 5. 6. 7. Installation 9. 10. Open the drinking Remove the dust lid. water faucet to release pressure for easy filter removal. 11. 12. Lift quick release arm. 13. Locate the filter handle and gently pull up the expired filter. 14. RESET 3 sec Press the quick release arm down gently until you hear a pop sound. Remember to put back dust lid.
Introduction Maintenance Replacing filter when indicator light is not blinking Follow steps 2-12 on the previous page to replace the filter. Then follow these next steps to manually reset the filter: 2. RESET 3. 4. 5. RESET 6. RO RO RO HYBRID HYBRID HYBRID RESET RESET RESET RESET NETWORK NETWORK NETWORK 3 sec Safety RO HYBRID 3 sec NETWORK Remember to flush the filter prior to use.
WARNING: To ensure safety and avoid injury and property loss to you and others, please be sure to adopt the following safety precautions. Ignoring safety precautions may result in damage to the system and void of warranty. Installation Safety Precautions [Prohibited] Introduction Safety Maintenance Safety Troubleshoot • Avoid installing the Purlette system where unit will be in direct sunlight. • Avoid exposure and storage in temperatures below 40 degrees Fahrenheit.
Installation Maintenance Safety • If the source of feed water does not meet municipal water standards, including high sediment content and excessive residual chlorine, etc. (e.g. private well water), a pre-treatment device shall be installed installed before using the system. • The required working pressure of the Purlette system is 14–100 psi. If the water pressure is lower or higher than this, please install pressure boosting device or pressure reducing device accordingly.
CAUTION: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Troubleshoot Warranty FCC Supplier’s Declaration of Conformity: Purlette / PL400G This device complies with part 15 of the FCC rules.
Issue Possible Cause Recommended Action • Check to ensure that the three-way water ball valve and the cold water supply valve are fully open. • Replace the damaged/expired filters. Filtered water quality is poor (High TDS level) • Filter not in use for an extended period of time (over 3 days) • Possible expired filter or clogged RO filter • Turn on the drinking water faucet and let it flush for 3-5 minutes. • Replace the expired/clogged filter.
Issue Safety Troubleshoot Warranty • Unplug the system power cord and close the threeway feed water ball valve. • Turn on the kitchen faucet and make sure the water is flowing before reopening the water valve and plugging in the system. • Shut off the three-way feed water ball valve and unplug the power cord. • Inspect the water lines and hoses for external leakage and tilt the purifier to check for internal leakage. If the leakage is internal, the water would drain out of the purifier base only.
Recommended Action System is leaking • Possible faulty Hybrid filter cartridge • Replace the Hybrid filter. • Drain the residual water from the base and then reset the system leakage detector by locating and disconnect the tap water input line (blue PE tube) from the purifier inlet port, then reinsert in the tap water input line. • If problem persist, cut off power and water to the system and contact customer support.
To obtain repairs or replacement within the terms of this warranty, please contact us at 1-800-928-7624 (open Monday to Friday, 8 am to 5 pm Pacific Time); or mail PURLETTE/VISINI USA INC., 136 N. Grand Ave., #330 West Covina, CA 91791. Proof of warranty coverage (i.e. - dated bill of sale) is required. Warranty No person or representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product.
Purlette/VISINI USA INC. West Covina, CA 91791 1-800-928-7624 support@purlette.
