PURPLE LEAF 10' ×13' PERGOLA ZY04BY1013-GY the 2 posts Putting the cover of zip bl the pos t to assemble all zip blinds Clip the po PURPLE LEAF PRODUCTS www.purpleleafgarden.com ©Copyright 2016-2021 Purple Leaf Inc.
Questions, problems, missing parts with this product? Do not hesitate to contact us at pergola@purpleleafgarden.com Warnings and Cautions Please retain this instruction for future usage and read carefully before assembly. Make sure you have all the parts & hardware as item list shows. 2 adults or more are recommended to install your gazebo. Do not discard any of the packaging until you have checked that you have all the parts and pack of fittings.
List Picture Description （mm) Q'ty (PC) Part No. Description （mm) Q'ty (PC) Part No. 8*35mm hex bolts 16 No1 1.
Posts are labeled with lettered stickers "AB","BC","CD" and "DA" Posts are labeled with lettered stickers "AB","BC","CD" and "DA" 1 1 Beams are labeled with lettered stickers "A","B","C","D" Beams are labeled with lettered stickers "A","B","C","D"
Critical note: plain and solid ground, if it is soft like grassland, hardening the posts location is necessary Tools You Will Need Tape Measure Percussion Drill Allen Wrench Step Ladders STEP ONE: framework assembly Post BC Post AB Post CD Post DA Base bracket of the post *4 No.2 screw kit *1 No.
Tighten 2 cross tapping screws Repeat for all posts STEP TWO: beam assembly Beam A*1 Beam C*1 Gutters No.
A 3 Fix the bolts and nuts in turn and tighten them Repeat to connect beam A with Post DA ,fasten the joiners，Make sure beam A side matches the A side of the 2 posts Beam B*1 Beam D*1 No.
Confirm the installation location,stand up the assembled parts(post AB+post DA+beam A) Confirm the installation location，stand up the assembled parts(post AB+post DA+beam A) B Connect Post AB and Post BC with Beam B,fasten the joiners Connect Post BC and Post CD with Beam C Connect Post CD and Post DA with Beam D fasten the joiners 5
STEP THREE : assemble the middle Beam Middle Beam *1 No.
Use the provided screws and fasten the joiners A C Cover both ends with plastic protection caps STEP FOUR : Assemble the gutter Assemble all the gutter 7
Using waterproof sealing tape on the joint of gutter C C Paste adhesive tape at the joints of middle beam and side beam 8
Louver blades
Zip blinds *4 The guiding rails *8 No.
Attach the zip blinds to the 2 posts Putting the cover of zip blinds clip into the gap on the post top Repeat to assemble all zip blinds Clip the post head into the post Make a slight adjustment if there is any difficulty to put the zip blind in 11
5 Take the screw out from NO.
Wooden floor Recommended accessories (Manufacturer do not supply) Recommended specifications: 10*100mm The blinds is locked when pulled down to the bottom DO NOT pull up the blind directly. The hook in the middle of the middle beam can be used to hang lamp or other decoration 13 First you need to unlock the spring by pressing the spring-lock button, then you can open the zip blinds.
Warranty Frames Frames constructions are warranted to be free from defects in material and worksmanship for 1 year from item purchased. Damage to frame from negligence won’t be covered by this warranty. Canvas Canvas is warranted to be free from defects in material and worksmanship for 1 year from item purchased. Damage from exposure to chemicals (including but not only oils ,spills, fluids) won't be covered by this warranty.
SUPPORT www.purpleleafgarden.com pergola@purpleleafgarden.com SOCIAL MEDIA Follow us on Instagram and Facebook www.purpleleafgarden.com/fb www.purpleleafgarden.com/ins Purple Leaf Inc. 1820 E Locust St, Ontario CA, 91761, US ©Copyright 2016-2021 Purple Leaf Inc.
