Owner`s manual

22 KODIAK
6.2 High Pressure Washdown (Optional)
A saltwater high pressure pump, controlled by a pressure
sensor, supplies the raw water hose connector located in the
cockpit. The pump is activated by the washdown switch
located below the starboard bolster in the cockpit. This
switch should be turned to the “ON” position just before
using the washdown and be turned to the “OFF” position
when the washdown is not in use.
When activated, the pressure switch will automatically
control the pump. As the pressure builds in the washdown
hose, the pump will shut off. When the washdown hose is
in use and the pressure drops, the pump will turn on.
The raw water washdown system is equipped with a sea
strainer located on the intake side of the pump. This should
be checked frequently and cleaned as necessary.
The Washdown Pump Connection
The washdown pump hose connection is located in the cockpit and uses a
standard garden hose connection.
ALWAYS TURN THE RAW WATER PUMP SWITCH TO THE “OFF” POSITION WHEN LEAV-
ING THE BOAT UNATTENDED.
DO NOT RUN THE HIGH PRESSURE PUMP DRY FOR EXTENDED PERIODS AS DAMAGE
TO THE PUMP WILL RESULT.
Washdown Pump
Washdown Hose
Connector
6-2