Owner`s manual

2270 CENTER CONSOLE
• Frequently test the automatic bilge pump switch for proper operation. This is accomplished by
inserting a stiff wire or small rod through one of the slots in the float chamber of the pump and
lifting the float switch until the pump is activated. You can also use a hose to flood the bilge
until the water level is high enough to activate the pump.
• Clean the bilge pump strainers of debris and check the bilge for foreign material that can cause
the automatic switches to malfunction.
• Frequently test the automatic bilge pump switches for proper operation.
• Flush all gravity drains with fresh water to keep them clean and free flowing.
• Clean and flush the fishboxes and livewells with soap and fresh water or a bilge cleaner after
each use to keep them clean and fresh.
ALL DRAINS AND PUMPS MUST BE PROPERLY WINTERIZED BEFORE WINTER LAY-UP.
NEVER USE HARSH CHEMICAL DRAIN CLEANERS IN MARINE DRAIN SYSTEMS. PER-
MANENT DAMAGE TO THE HOSES AND FITTINGS MAY RESULT.
6-3