Owner`s manual

3070 EXPRESS
1-6
Compass
The compass is on top of the helm. To adjust the compass for your area, read the instructions
on “Compass Compensation” given to you in the literature packet. The compass cannot be
adjusted accurately at the factory as it must be compensated for the influence of the electrical
equipment and electronics unique to your boat. Therefore, the compass should be adjusted by
a professional after the electronics and additional electrical accessories are installed and before
operating the boat.
Instrument Maintenance
Electrical protection for instruments and ignition circuitry is provided by a set of circuit breakers
located near the main battery switch and on each engine. The ignition switches should be sprayed
periodically with a contact cleaner/lubricant. The ignition switches and all instruments, controls,
etc. should be protected from the weather when not in use. Excessive exposure can lead to gauge
and ignition switch difficulties.