Owner`s manual

3100 OFFSHORE
119
• Check the engines for damage and follow the manufacturer’s instructions for recommissioning.
• Check the engine mounting bolts to make sure they are tight.
• Perform all routine maintenance.
• Check all hose clamps for tightness.
• Pump the antifreeze from the fresh and raw water systems and flush several times with fresh water. Make
sure all antifreeze is flushed from the water heater and it is filled with fresh water before it is activated.
• Check and lubricate the steering system.
• Clean and wash the boat.
• Install all upholstery, cushions and canvas.
After Launching:
• Carefully check the engines and all water systems for leaks. Operate each system one at a time checking
for leaks and proper operation.
• Check the bilge pump manual and automatic switches.
• Check the propeller shaft couplings for proper alignment. Allow the boat to remain in the water for several
hours before checking the alignment.
• Prime the fuel system and start the engines. When each engine starts, check the exhaust ports for water
flow. This ensures that the cooling pump is operating.
• Carefully monitor the gauges and check for leakage and abnormal noises.
• Operate the boat at slow speeds until the engine temperature stabilizes and all systems are operating
normally.