ASCL6 Remote Access Set up & Device Activation Guide 428#####
ATTENTION If installing the CL6 (ASCL6) with any one of the VOXX Brands (Prestige, Pursuit, Or Code Alarm) the Alarm/Remote start module must be updated to the latest firmware version. This will require the VOXX USB updating cable, Part# VEPROG. Prestige/Pursuit: Please visit www.veprog.com to update to the latest firmware version. Code Alarm: Please visit www.voxxuniversity.com to download the CA Utility APP. The APP can be found in the VOXXTECH section of the website.
Welcome to the CarLink 6 (CL6) set up and activation guide. Device set up preformed from a mobile device via the CL6 mobile application. The same CL6 app (iOS & Android) is used by the installer and the user. Please follow the directions below to begin setting up, testing and releasing the users device: NOTE: The user can download and create their account prior to the device set up. 1. Download the “CL6” mobile app 2. Create an account via the mobile app 3.
Example Welcome Email 4. A ‘Welcome Email’ will be sent to the email registered to the CL6 account 5. Click ‘Set Password’ in the welcome email 6. You will be re-directed to a page to create a password for your account NOTE: Here you can view your login name and User ID. 7.
8. Open the CL6 app and log in with your newly created credentials 9. Once logged in, tap the ‘+’ symbol in the bottom right corner to add a vehicle 10.
11. Once the serial number is submitted, the vehicle profile will be listed in the ‘My Cars’ section of the app – the device is now in set up mode 12. Tap on the new vehicle under My Cars to configure the device protocol and vehicle information 13.
14. Click ‘Settings’ in the vehicle configuration menu to set the device protocol, vehicle image, AUX settings (and icons) and the vehicle name NOTE: This information can be adjusted by the user and is not permanently set. 15. All AUX controls need to be customized – configure the AUX output to the function it controls 16.
17. Once the set up is complete, the vehicle image will be displayed and the remote access features can be tested NOTE: You can verify if the device is connected via the app. Check the connection icon, next to the battery icon, to check signal strength. 18. After the features are tested, you need to tap ‘Release Vehicle’ in the My Cars section – instruct the user to add the device through the app with the device’s serial number NOTE: A released vehicle will only be available for 24 hours.
