Owner`s manual

C 230

accessories are mounted in the wrong location, the warranty could be void. If you intend to add equipment

or make modifications to the T-top, you should contact Pursuit Customer Relations to make sure the

equipment you would like to add or the intended modification will not void the warranty on the T-top.

If an after market T-top is installed, it must be designed with front legs that are bolted to the console on either

side of console seat and the rear legs bolted to the cockpit sole at the rear of the console. There are aluminum

plates or wood reinforcement in the laminate in these areas for securing the T-top leg bases. Both front and

rear legs should also have brackets that are thru-bolted to the console just below the windshield to provide

additional stiffening for the T-top. If you intend to install an after market T-top on your boat, please contact

your dealer or Pursuit Customer Relations.