Owner`s manual

C 260

BATTERY SWITCH (2): These switches feed

the engine(s) and DC circuits. These are "ON/

OFF" switches. Turn the switch so that the green

"ON" indicator is displayed. Both switches

should be in the "ON" position whenever the boat

is in operation.

PARALLEL SWITCH: Connects the two bat-

teries together for engine starting or charging of

both batteries. This switch should only be used

for emergency starting.

VOLTAGE SENSITIVE RELAY (VSR): The

VSR allows two batteries to be charged either by

one engine or by the on-board battery charger. The VSR prevents both batteries from being discharged by

automatically isolating the engine battery.

24-HOUR ESSENTIAL CIRCUITS: Used for protection of circuits that are not switched off by battery

master switches.

MEDIUM DUTY CIRCUIT BREAKER: Used to protect high amperage circuits and panel feeds.

HEAVY DUTY CIRCUIT BREAKER: Used to protect the windlass circuit.

HEAVY DUTY DISTRIBUTION STUD: One or more of these may be used to distribute negative DC

power.

HEAVY DUTY BUSS: Contains multiple distribution studs to distribute negative DC power.

BLANK MODULE: Acts as a filler to complete the modular design.

THE BOAT SHOULD NOT BE OPERATED ON A CONTINUOUS BASIS WITH THE PARAL-

LEL SWITCH IN THE "ON" POSITION.

4.4 12-Volt DC Panels

Battery Switches

Helm Breaker Panel