Owner`s manual

C 260

The entire AC circuitry, especially the shore power cord, should be seasonally tested for proper continuity

by an experienced electrician. This will detect any shorts, open wires or ground faults. Ground fault

interrupters should be tested periodically to ensure proper operation by pressing the test/reset buttons in the

center of face plate. The polarity indicator system also should be inspected for proper operation.

CORROSION ALLOWED TO BUILD ON THE ELECTRICAL CONNECTORS CAN CAUSE A

POOR CONNECTION RESULTING IN SHORTS, GROUND FAULTS OR POOR GROUND CON-

NECTIONS. ELECTRICAL CONNECTORS SHOULD BE CHECKED AT LEAST ANNUALLY

AND CLEANED AS REQUIRED. DO NOT ALLOW CORROSION TO BUILD ON CONNEC-

TIONS.

THE AC AND DC ELECTRICAL SYSTEMS ALWAYS SHOULD BE DISCONNECTED FROM

THE POWER SOURCE BEFORE INSPECTING OR SERVICING THE SYSTEM. NEVER SER-

VICE ANY COMPONENT OF AN ELECTRICAL SYSTEM WHILE IT IS ENERGIZED.