Owner`s manual

Exterior Equipment
7-1
Section 7
C 250
Exterior Equipment
7.1 Deck
Rails and Deck Hardware
The rail system and hardware fittings have
been selected and installed to perform spe-
cific functions. The deck cleats are flush
mount and must be raised prior to use.
Fenders or mooring lines should be secured
to the cleats and not to rails or stanchions.
Be sure a clear lead exists when running
dock lines or anchor lines. A line inadver-
tently run around a stanchion or over the rail
could cause damage.
Deck Cleats
Anchor Chain Secured, w/ windless option
Bow Pulpit and Roller (Optional)
The bow pulpit is equipped with a roller
assembly that allows the anchor to be oper-
ated and stored at the pulpit. The pulpit roller
is designed for a Delta® plow or a Danforth®
style anchor. A chain binder is provided on
the deck near the pulpit to secure the
anchor. Always make sure the anchor chain
is secured by the chain binder before getting
under way.
! CAUTION
All fittings must be periodically
inspected for loose fit or wear and
damage. Any problems should be cor-
rected immediately.
! CAUTION
Pursuit boats are not equipped with
hardware designed for towing pur-
poses. The mooring cleats are not to
be used for towing another vessel or
having this boat towed.