Operating Instructions
US - EN
│
13 ■
If the outdoor temperature is not displayed within approx. 3minutes,
the temperature station will stop searching for reception.
The reception icon
turns off and is displayed on the outdoor
temperature panelr. The system likely cannot detect a signal due
to structural conditions or because the sensor is too far away.
If the device is unable to automatically connect to the outdoor sensor,
you can establish a connection manually:
♦ Press and hold the
button0 until the reception icon flashes
on the outdoor temperature panelr.
♦ Press the TX buttond to manually start the wireless signal for the
outdoor sensor.
The temperature station automatically starts to receive the WWVB signal
after 3minutes, regardless of whether the outdoor sensor reception
search was successful or not.
The reception icon
flashes on the time panel6. If the reception
icon is not flashing completely ( ) on the display4, it means that
the reception of the WWVB signal is too weak and the time cannot be
synchronized. Try to find a set-up location where the reception icon ( )
flashes completely on the display4. If the WWVB signal is being
received correctly, the current Coordinated Universal Time (UTC) is dis-
played on the time panel6 and the date and weekday are displayed
on the date panel8. In addition, the reception symbol is permanent-
ly displayed on the time panel6.
IB_345564_AFT77B2_Funk-Temperaturstation_LB9.indb 13 10.09.20 15:34