Operating Instructions
■ 14
│
US - EN
If the device is unable to synchronize with the WWVB signal, you can
attempt automatic reception again or turn off this function and set the
time manually (see Basic settings section).
♦ Press the
buttonw to attempt the reception search again.
The reception icon flashes on the time panel6.
♦ To cancel the reception attempt, press the
buttonw.
The reception symbol on the time panel6 turns off.
If synchronization with the WWVB signal is still not possible, you can
manually enable/disable the automatic WWVB reception function.
♦ Press and hold the
buttonw. The upper part of the reception
symbol ( ) is shown on the time panel6. The automatic WWVB
reception function is turned off.
♦ Press and hold the
buttonw again.
The automatic WWVB reception function is turned back on and
can be restarted.
IB_345564_AFT77B2_Funk-Temperaturstation_LB9.indb 14 10.09.20 15:34