Operating Instructions

■ 16
│
US - EN
Displays in basic mode
After the temperature station has received the signal from the outdoor
sensor and the WWVB signal, the device enters basic mode. In basic
mode, the temperature station displays the following information:
Alarm 1 panelt and Alarm 2 panel 5
The alarm times are displayed
in 12-hour format by default.
When the alarm is turned on,
the or symbol appears next to the corresponding alarm time. If
the snooze function is activated, also flashes on the corresponding
alarm panel.
The time panel6
By default, the time is displayed in 12-hour
format. During summer, (daylight
saving time) is displayed. This display is
only shown if the WWVB signal is being
received. If you live in an area that does not recognize daylight saving
time (i.e. parts of Arizona and Indiana), you must turn off this function
(see Basic settings section).
IB_345564_AFT77B2_Funk-Temperaturstation_LB9.indb 16 10.09.20 15:34