Operating Instructions

US - EN
│
21 ■
Setting the alarm
You can set two different alarms on the temperature station.
♦ Press and hold the
buttone for approximately 3 seconds.
The hour display flashes on the alarm 1 panelt.
♦ Press the
button0 or the buttonw to set the desired
value.
♦ Press the
buttone to confirm your entry. The minute display
flashes.
♦ Press the button0 or the buttonw to set the desired
value.
♦ Press the
buttone to confirm your entry.
The process for setting the second alarm time is similar to that of
setting the first.
♦ Press and hold the
button9 for approximately 3 seconds to
access the setting mode of the second alarm time.
♦ Now, follow the steps described above to set the second alarm time.
Activating/deactivating the alarm
♦ Press down the button1 or the button3 to activate Alarm
1 or Alarm 2. The or symbol appears on the corresponding
alarm panel (t or 5) to show that the alarm is activated.
♦ Press the
button1 or the button3 (so that it pops back
up) to deactivate Alarm 1 or Alarm 2. The or symbol turns off
on the corresponding alarm panel (t or 5).
IB_345564_AFT77B2_Funk-Temperaturstation_LB9.indb 21 10.09.20 15:34