Operating instructions

(9) Now screw the Connector

Locker in tight to ﬁx the

bushing and cable.

(1) First make sure that the maximum open circuit voltage Voc of each

PV string is below 750VDC UNDER ANY CONDITION.

(2) Always connect PV-Panel positive (+) terminal to PV-Inverter DC

positive (+) terminal, and the PV-Panel negative (-) terminal to PV-

Inverter DC negative (-) terminal.

(3) Each set of PV-Inverter DC terminals takes a maximum DC input

of 8.5 A. As a result, 3 pairs of PV-Inverter DC terminals can take a

combined input of up to 25.5 A.

5.4 connEcting thE PV-PanEl