Specifications

V97-600002 Page 13 of 31
Figure 6: AC Wiring for the Line 1, Line 2, and Ground Wires
WARNING: Before proceeding with the DC wiring, completely cover the
surface of all PV panels with dark material to avoid the production of electrical
current.
WARNING: Make sure the polarity and the PV panel voltage between the
positive and the negative cable connectors of the PV panels are correct before
connecting the panels to the DC terminal block on the power distribution board.
The PV array open circuit voltage should be at or below the listed voltages in Table
2-4 under all circumstances. Each DC input to the DC terminal block must be less
than the voltages listed in Table 2-4.
AC Ground
Line 1
Line 2