Specifications

V97-600002 Page 15 of 31
WARNING: Do not connect or disconnect the jumper while the inverter is
supplied with DC or AC power.
7. Remove the 1 A fuse and select the negative or positive grounding jumper
included with the inverter (see Figure 7).
Figure 7 Grounding Jumpers
8. Install the grounding jumper with the white wire on the right into connector
J3 on the power board (see Figure 8).
Figure 8 Power Board Connections
Negative ground
jumper has a
black wire
Positive ground
jumper has a red
wire
PV Negative
PV Positive
Fuse Clips
GFI Jumper (J3)