Specifications

V97-600002 Page 19 of 31
3.2.2.1 Normal Display Cycle
The display will change screens every two seconds to show a different set of
information.
Normal startup:
2000 Watt PV
Start in 269 sec
0 Watts
3212 kWh
240 VAC
297 VDC
Running:
2000 Watt PV
Grid Tied Inv
1245 Watts
3212 kWh
241 VAC
255 VDC
If a fault occurs, the display also provides a corresponding fault code. Refer to the
Troubleshooting section of this manual.
4 TROUBLESHOOTING
The inverter provides two indicator lights that help troubleshoot problems.
• The light on the left is a RED LED.
The RED LED illuminates any time the DC voltage is below the inverters
startup DC voltage, such as at night. The RED LED blinks if the inverter has
had a fault condition, and the vacuum fluorescent display (VFD) displays a
fault code. Possible faults are listed in this Troubleshooting section.
• The light on the right is a GREEN LED.
The GREEN LED illuminates any time the DC voltage is above the inverter’s
DC start voltage and all operational parameters are met. When the GREEN
light illuminates, the inverter tries to invert power from the PV array.
4.1 Red and Green LED Lights ON
If this condition occurs (both lights are on solid at the same time), contact PV
Powered for technical
assistance.