Specifications

V97-600002 Page 22 of 31
0100 0000 CPU Fault
The inverter encountered a problem in the CPU.
This fault requires an AC power cycle to reset. If
this fault happens again contact PV Powered for
service.
0040 0000 Over Current
Safety protection; the inverter tried to produce too
much current.
0020 0000 Pre-charge
The inverter experienced trouble starting up the
transformer. If this happens again, contact PV
Powered.
0004 0000 Heatsink Temp
The heat sink is above or below the operating
limits of -15°F to 200°F (-25°C to 95°C).
0002 0000 Watchdog Fault
The CPU experienced a watch dog fault. This fault
requires an AC power cycle to reset. If this occurs
again contact PV Powered.
0001 0000 Ambient Temp
The temperature detected inside the inverter is
outside the normal operating limits of -15°F to
200°F (-25°C to 95°C).
WARNING: These servicing instructions are for qualified personnel only. To reduce
the risk of electric shock, do not perform any servicing other than that specified in the
operating instructions unless you are qualified.