Specifications

V97-600002 Page 4 of 31
IMPORTANT SAFETY INSTRUCTIONS
This product has been engineered and manufactured to ensure your personal safety.
Improper use may result in potential electrical shock or burns. Please read and
follow all instructions for installation, use and servicing of this product.
NOTE: A locking tab has been designed into the PV Powered Grid Tied Residential
Inverter line. It is the sole responsibility of the end user to provide a locking
mechanism that utilizes the tab, and secures the cover on the inverter.
SAVE THESE INSTRUCTIONS – This manual contains important
instructions for the PV Powered Grid Tied Residential Inverter product line
that must be followed during installation and maintenance of these
inverters.
CAUTION:
• All electrical installations should be done in accordance with local electrical
codes and the National Electrical Code (NEC), ANSI/NFPA 70.
• Before connecting the inverter to the electrical utility grid, your utility
company must grant approval. Only qualified electricians should make the
connection.
• When exposed to light, photovoltaic (PV) arrays create electrical energy that
could cause a hazardous condition. To avoid this, completely cover the
surface of all PV arrays with opaque (dark) material before wiring them.
• The inverter contains no user-serviceable parts. Refer maintenance to
qualified service personnel.
• Do not touch the heat sink located at the top of the inverter, temperatures
can exceed 158°F (70°C).
FCC Compliance:
The PV Powered Grid Tied Residential Inverters have been tested and found to pass
FCC Class B radio interference standards with proper installation of the inverter. This
is not a guarantee that there will be no interference at every installation. If you
notice interference at your installation, try the following potential solutions:
• Move or re-orient the affected device.
• Increase the distance between the devices.
• Connect the device to a different AC circuit.
Please read all safety warnings and instructions before
installing or operating the inverter.
SAVE THESE INSTRUCTIONS