User manual

animal incursion. Do not penetrate the cabinet at any other location. All gland plates
need to be installed for proper operation of the inverter.
TOOLS REQUIRED
•
5/32″ hex wrench
• NEMA 4 conduit hubs
• Knockout punch
TO USE THE GLAND PLATES
☞ Important
All penetrations in the inverter cabinet must be through the gland plates which
are provided for the sole purpose of a safe and convenient way to route wiring
in to and out of the inverter. Penetrating the inverter cabinet in any other
location besides the gland plates voids the warranty.
☞ Important
Remove all metal shavings and wire scraps from the inverter prior to replacing
the gland plates.
1. Select the size(s) and location(s) of the hole(s) that need to be punched.
4346
Figure 4‑11. DC bottom entry gland plates
Advanced Energy
4‑10 Installing 570-1001792-05A