Instructions / Assembly

E
XTREME Adhesives, Inc. 63 Epping Road Raymond, NH 03077
A Division of Royal Adhesives & Sealants, LLC
603-895-4028 - FAX [phone]
http://www.pvctrimwelder.com
http://www.extremeadhesives.com/
PVC TrimWelder Fast Cure Starter Kit
Instructions for the EXTREME Adhesive Cartridge Adapter
The 50ml EXTREME ® Adhesive cartridge adapter fits all standard
caulking guns.
To use, insert the EXTREME Adhesive ®
cartridge into the adapter as shown
Slip the retainer on the blue cartridge plunger over the caulking gun
follower plate
Place the filled adapter in the caulking gun barrel, aligning the plunger with
the cartridge
Advance the plunger forward until light contact is made with the
cartridge pistons. Remove the tip cap from the cartridge and attach a
mixer.
The adhesive is ready to use!
Tips:
 As with caulk, relieve the pressure on the cartridge after use to minimize dripping
 Mark the tip cap with a Sharpie before removal so it may be replaced in the correct position to reseal the cartridge
 Do not store with mixer still attached for more than ½ hour