SDS

ManualsBrandsPVC TrimWelder ManualsBuilding materials220 ml Fast Cure in Bright White

Page 1/9

Safety Data Sheet

acc. to OSHA HCS

Printing Date 06/10/2015 Revision Date 06/10/2015Revision Number 1

40.1.1

1 Identification

Product identifier

Trade name: PVC TrimWelder Fast Cure Part A

Relevant identified uses of the substance or mixture.

Adhesive

Details of the supplier of the safety data sheet

Manufacturer/Supplier:

Extreme Adhesives, LLC

A Division of Royal Adhesives & Sealants, LLC

63 Epping Road

Raymond, NH 03077

800-888-4583

Information department:

Environment protection department.

Emergency telephone number:

ChemTrec: Day or Night within USA and Canada: 1-800-424-9300.

Outside USA and Canada: +1 703-527-3887 (collect calls accepted)

2 Hazard(s) identification

Classification of the substance or mixture

GHS02 Flame

Flam. Liq. 2 H225 Highly flammable liquid and vapor.

GHS07

Eye Irrit. 2A H319 Causes serious eye irritation.

STOT SE 3 H335 May cause respiratory irritation.

Label elements

GHS label elements

The product is classified and labeled according to the Globally Harmonized System (GHS).

Hazard pictograms

GHS02 GHS07

Signal word

Danger

Hazard statements

Highly flammable liquid and vapor.

Causes serious eye irritation.

May cause respiratory irritation.

Precautionary statements

If medical advice is needed, have product container or label at hand.

Keep out of reach of children.

Read label before use.

(Contd. on page 2)

USA

Summary of content (9 pages)

PAGE 1
40.1.1 Page 1/9 Safety Data Sheet acc. to OSHA HCS Printing Date 06/10/2015 * Revision Number 1 Revision Date 06/10/2015 1 Identification · Product identifier · Trade name: PVC TrimWelder Fast Cure Part A · Relevant identified uses of the substance or mixture.
PAGE 2
40.1.1 Page 2/9 Safety Data Sheet acc. to OSHA HCS Printing Date 06/10/2015 Revision Number 1 Revision Date 06/10/2015 Trade name: PVC TrimWelder Fast Cure Part A (Contd. of page 1) Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Use explosion-proof electrical/ventilating/lighting/equipment. Avoid breathing dust/fume/gas/mist/vapors/spray Wear protective gloves / eye protection / face protection. Wear eye protection / face protection. Ground/bond container and receiving equipment.
PAGE 3
40.1.1 Page 3/9 Safety Data Sheet acc. to OSHA HCS Printing Date 06/10/2015 Revision Number 1 Revision Date 06/10/2015 Trade name: PVC TrimWelder Fast Cure Part A (Contd. of page 2) * 4 First-aid measures · Description of first aid measures · After inhalation: Supply fresh air or oxygen; call for doctor. In case of unconsciousness place patient stably in side position for transportation. · After skin contact: Immediately wash with water and soap and rinse thoroughly.
PAGE 4
0.1.1 Page 4/9 Safety Data Sheet acc. to OSHA HCS Printing Date 06/10/2015 Revision Number 1 Revision Date 06/10/2015 Trade name: PVC TrimWelder Fast Cure Part A (Contd. of page 3) * 7 Handling and storage · Handling: · Precautions for safe handling Avoid prolonged or repeated contact with skin. Avoid contact with eyes. Wash thoroughly after handling. Handle/process in well ventilated areas. Open containers in a well ventilated area and avoid breathing headspace vapors.
PAGE 5
40.1.1 Page 5/9 Safety Data Sheet acc. to OSHA HCS Printing Date 06/10/2015 Revision Number 1 Revision Date 06/10/2015 Trade name: PVC TrimWelder Fast Cure Part A (Contd. of page 4) Immediately remove all soiled and contaminated clothing. Wash hands before breaks and at the end of work. Avoid contact with the eyes and skin. · Breathing equipment: Use approved respiratory protection equipment when airborne exposure is excessive.
PAGE 6
40.1.1 Page 6/9 Safety Data Sheet acc. to OSHA HCS Printing Date 06/10/2015 Revision Number 1 Revision Date 06/10/2015 Trade name: PVC TrimWelder Fast Cure Part A (Contd. of page 5) · Danger of explosion: Product is not explosive. However, formation of explosive air/vapor mixtures are possible. · Flammable limits: Lower: Upper: 2.1 Vol % 12.5 Vol % · Vapor pressure at 20 °C (68 °F): 47 hPa (35 mm Hg) · Specific gravity at 20 °C (68 °F): · Relative density · Vapour density · Evaporation rate 0.
PAGE 7
40.1.1 Page 7/9 Safety Data Sheet acc. to OSHA HCS Printing Date 06/10/2015 Revision Number 1 Revision Date 06/10/2015 Trade name: PVC TrimWelder Fast Cure Part A (Contd. of page 6) * 11 Toxicological information · Information on toxicological effects · Acute toxicity: · LD/LC50 values that are relevant for classification: 79-41-4 methacrylic acid Oral LD50 1332 mg/kg (mouse) Dermal LD50 500 mg/kg (rabbit) · Primary irritant effect: · on the skin: May irritate the skin.
PAGE 8
40.1.1 Page 8/9 Safety Data Sheet acc. to OSHA HCS Printing Date 06/10/2015 Revision Number 1 Revision Date 06/10/2015 Trade name: PVC TrimWelder Fast Cure Part A (Contd.
PAGE 9
40.1.1 Page 9/9 Safety Data Sheet acc. to OSHA HCS Printing Date 06/10/2015 Revision Number 1 Revision Date 06/10/2015 Trade name: PVC TrimWelder Fast Cure Part A (Contd. of page 8) · Proposition 65 · Chemicals known to cause cancer: None of the ingredients is listed. · Chemicals known to cause reproductive toxicity: None of the ingredients is listed.